Experimental Techniques, Rotating Machinery, and Acoustics, Volume 8 Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics, 2015 /
Experimental Techniques, Rotating Machinery & Acoustics, Volume 8: Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics, 2015, the eighth volume of ten from the Conference brings together contributions to this important area of research and engineering. The collectio...
| Corporate Author: | |
|---|---|
| Other Authors: | |
| Language: | English |
| Published: |
Cham :
Springer International Publishing : Imprint: Springer,
2015.
|
| Edition: | 1st ed. 2015. |
| Series: | Conference Proceedings of the Society for Experimental Mechanics Series,
|
| Subjects: | |
| Online Access: | https://doi.org/10.1007/978-3-319-15236-3 |
Table of Contents:
- 1. A Computational Model to Investigate the Influence of Spacing Errors on Spur Gear Pair Dynamics
- 2. Drill Vibration Suppression through Phase-Locked Loop Control
- 3. Towards the Selection of Balancing Planes to Attain Low Vibrations in Flexible Rotor Motor Systems
- 4. Experimental Acoustic Modal Analysis of an Automotive Cabin
- 5. Uncorrelated Noise Sources Separation Using Inverse Beamforming
- 6. ACTIVE NOISE CONTROL EXPERIMENT MINIMISING RADIATION OF ACTIVE ENERGY
- 7. Active Control of Transformer Noise by MIMO Algorithm
- 8. Numerical Prediction Tools for Low-frequency Sound Insulation in Lightweight Buildings
- 9. Reduction of Radiating Sound from CFRP Laminated Plates with Orthotropy
- 10. Rotating disc model for complex eigenvalue analysis of brake squeal
- 11. Validation of closed-loop coupling disc brake model for squeal analysis
- 12. Estimation of Torsional Compliance from Free-Free FRF Measurements: eRCF Theory
- 13. An Estimation of Torsional Compliance (Stiffness) from Free-Free FRF Measurements: eRCF Application
- 14. Estimation of Bending Compliance (Stiffness) from Free-Free FRF Measurements: eBCF Theory
- 15. In-Situ Experimental Modal Analysis of a Direct-Drive Wind Turbine Generator
- 16. Effect of Radial Confinement on Wave Propagation and Vibrational Response in Bars
- 17. Component Qualification Using 3D Laser Vibrometry and Transmissibility Models
- 18. Exploiting Continuous Scanning Laser Doppler Vibrometry and Wavelet Processing for Damage Detection
- 19. Use of 3D Scanning Laser Vibrometer for Full Field Strain Measurements
- 20. Inline measurements of rail bending and torsion through a portable device
- 21. Forty Years of Use and Abuse of Impact Testing: A Practical Guide to Making Good FRF Measurements
- 22. Detection of Coupling Misalignment by Extended Orbits
- 23. Linear and Nonlinear Response of a Rectangular Plate Measured with Continuous-Scan Laser Doppler Vibrometry and 3D-Digital Image Correlation
- 24. Vibration Event Localization in an Instrumented Building
- 25. Loading Effect on Induction Motor Eccentricity Diagnostics Using Vibration and Motor Current.